Quikcote - Velvet Finish Grey 13kg
CFultons-building-garden-supplies

Quikcote – Velvet Finish Grey 13kg

Quikcote Velvet finish gives the impression of smooth
concrete. Perfect for fireplace surrounds and interior and
exterior feature walls. It is a hard and durable product that
provides long-term protection; it has to be coated with
Quikcote Sealer for durability and protection (refer to
Quikcote Sealer TDS). Velvet Finish is available in Grey,
White and off-white colour based on cement used.

PRODUCT DESCRIPTION
Packing 13kg Bag Coverage: 7-10 SqM/Bag. Thickness: 2- 3 mm
Application Method
Steel Trowel
Drying Time
7 Days, Max Strength 28 Days

SUITABLE SUBSTRATES
• Exterior & Interior Rendered surfaces.
Only use Quikcote products and the recommended
POLYCLAD Polystyrene System.

SUBSTRATE PREPARATION
• Areas not to be coated should be masked and protected.
• All surfaces to be rendered must be dry, clean, sound
and free from contaminants including: oil, mould release,
dust, dirt, silicone, mud, grease, salt, efflorescence,
animal droppings and any loose or flaking material.
• Suitable for exterior and interior surfaces.
Ensure render is cured properly before application of
Velvet Finish

APPLICATION
Tools/Machinery Required: Hawk & Steel trowel,
Polystyrene float, plastic floats, straight edge, sponge,
power mixer, masking tapes, drop sheeting.
• Mix one (1) 13kg bag of Velvet Finish to @ 3 – 4 litres of
clean water using a power mixer.
• Add the Dry Mix Velvet Finish to water steadily while
mixing with a power stirrer until the consistency is
smooth and lump-free.
• Allow the mix to stand for 5 minutes, remix before use
or before adjusting consistency if required.
• This is a two-coat application; apply first skim- coat
using a steel trowel, being no less than 2mm and up to
3mm thick.
• As soon as the first coat is applied, apply a second skim coat
of 2mm to 3mm, once the coat has firmed slightly, level
and finish off with a steel trowel, splashing water with a
brush, to produce an even, uniform and smooth surface.
Do not apply Velvet Finish over expansion joints
• Velvet Finish should be completely dry before
• application of Quikcote Sealer, minimum 3 days and
ideally 7 days from the date of application. To complete
project, refer to Quikcote Sealer

CLEAN UP
Clean up with water

Disclaimer:
This is a natural product, and variations and inconsistencies in size, colour and shape will occur. Photographs are for illustration purposes and to be used as an indication only.